VI.
To Install 2.5” Hard Disk to HDD Tray
1.
Locate the HDD racks on the chassis.
2.
Push the 2.5’’ HDD into the room between the
racks until the screw holes of the racks
matched those in the HDD and make sure the
direction is as same as picture showed.
3.
Lock the 2.5’’HDD to the racks by tightening
up the marked four screws.
4.
Connect SATA power cable & one end of
compatible SATA cable to corresponding
connectors from the hard disk.
5.
Sort and place the SATA cable and SATA power cable beside the case as showed above.
