IV.
To Install M.2 M-Key (2242/2280) PCIe/SATA Card
1.
Sort out the USB cable to make room and
locate the M.2 SATA slot on the board. System
supports two types of M.2 M-Key card in
different lengths (2242/2280). Prepare
compatible M.2 M-Key (2242/2280) card
2.
To install compatible type-2242 card, please
remove the screw in the marked spot at first.
3.
Insert compatible M.2 M-Key (type-2242) card
into the slot. See to it that the golden-finger side
should be fully plugged into the slot.
4.
Tighten up the screw removed before to the
marked spot to secure the card.
*Note: If you wish to install type-2280 card, please remove the screw and the screw blot on location MH2
and reinstall the screw post underneath on the location MH4 before installing type-2280 card to the slot.
The other steps are the same as M.2 M-key type-2242 card installation.
2242
2280
