V.
To Install M.2 B-Key (3042/3052) Card
1.
Locate the M.2 B-Key PCIe (3042/3052) slot on
the board. Prepare compatible M.2 B-Key
(3042/3052) card.
2.
Remove the marked screw and use it to lock
compatible card to the slot in later installation.
3.
Insert the gold-finger side of the compatible
M.2 B-Key (type-3042) card into the slot and
press down. See to it that the golden-finger side
should be fully plugged into the slot.
4.
Secure the card to the board by tightening up
the screw to the marked spot.
*Note: If you wish to install M.2 B-key type-3052 card, please remove the installed M.2 B-key type-
3042 card and remove the screw at location MH3 before installing type-3052 card to the slot. The
other steps are the same as M.2 B-key type-3042 card installation.
3042
3052
