22
ERP Support
Use this item to Energy-Related Products function
The optional settings: [Disabled]; [Enabled].
This item should be set as [
Disabled
] if you wish to have all active wake-up
functions.
Case Open Detect
Use this item to detect case has already open or not, show message in POST.
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], system will detect if COPEN has been short or not (refer to
Page 9); if
Pin 7&8 of J1
is short, system will show Case Open Message during
POST.
WatchDog Reset Timer
Use this item to enable or disable WDT reset function.
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], the following sub-items shall appear:
WatchDog Reset Timer Value
User can select a value in the range of [10] to [255
] seconds when ‘
WatchDog
Reset Timer Unit
’ set as [Sec]; or in the range of [1] to [255] minutes when
‘
WatchDog Reset Timer Unit
’ set as [Min].
WatchDog Reset Timer Unit
The optional settings are: [Sec.]; [Min.].
WatchDog Wake-up Timer
This item support WDT wake-up.
The optional settings are: [Enabled]; [Disabled].
When set as [Enabled], the following sub-items shall appear:
WatchDog Wake-up Timer Value
User can select a value in the range of [10] to [4095] seconds
when ‘
WatchDog
Wake-up Timer Unit
’ set as [Sec]; or in the range of [1] to [4095] minutes when
‘
WatchDog Wake-up Timer Unit
’ set as [Min].
