13
3.
Insert the gold-figure side of the compatible
card into the slot and press down.
4.
Lock the card to the board by tightening
up the screw to the marked spot.
5.
Locate the antenna slots on the card.
6.
Press the metal hat on the end of the
antenna string to the antenna slot on the
card as shown (If you install two
antenna, press the left metal hat of the
left antenna to the left slot, the right
metal hat to the right slot).
7.
Locate the Wi-Fi antenna connectors in
the rear panel.
8.
Connect the external Wi-Fi receiver
antenna to the antenna connector on
the rear panel.
