23
clock cycles of CAS latency depends on the DRAM timing. Do not reset this field from
the default value specified by the system designer.
The choice: 2T, 3T.
•
AGP Aperture Size :
Select the size of the Accelerated Graphics Port (AGP) aperture.
The aperture is a portion of the PCI memory address range dedicated for graphics
memory address space. Host cycles that hit the aperture range are forwarded to the AGP
without any translation. See www.agpforum.org for APG information.
The choice: 4 MB, 8MB, 16 MB, 32 MB, 64 MB, 128 MB, 256MB.
•
CPU Host/SDRAM Clock :
Choose CPU Front side Bus clock (Host Clock)/SDRAM Clock
The choice: 66/66,75/75,83/83,95/95,100/100.
•
CPU Clock Ration Jumpless :
Enable/disable the CPU Clock ration control.
The choice: Enabled, Disabled.
•
Processor Core Frequency :
Select Ratio.
The choice: X2.0,X2.5,X3.0,X3.5,X4.0,X4.5,X5.0,X5.5,X6.0,X6.5,X7.0,X7.5,X8.0
3-4 POWER MANAGEMENT SETUP
The Power Management Setup allows you to configure you system to most effectively save
energy while operating in a manner consistent with your own style of computer use.
ROM PCI/ISA BIOS (2A6INJ19)
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
ACPI function : Enabled
Power Management : User Define
PM Control by APM : Yes
Video Off Option : Susp Stby-> Off
Video Off Method : V/H SYNC+Blank
Switch Function : Break/Wake
Doze Speed (div by) : 2/8
Stdby Speed(div by) : 1/8
MODEM Use IRQ : 3
Hot Key Fumction As : Power OFF
** PM Monitor **
** PM Events **
HDD Ports Activity : Enabled
COM Ports Activity : Enabled
LPT Ports Activity : Enabled
VGA Activity : Enabled
IRQ [3-7 , 9-15], NMI : Enabled
IRQ 8 Bredk Suspend : Disabled
Power Button Over Ride : Instant OFF
Ring Power Up Control : Disabled
KB Power ON Password : Enter
Power Up by Alarm : Disabled
HDD Off After : Disable
Doze Mode : Disable
Standby Mode : Disable
Suspend Mode : Disable
Esc: Quit ↑↓→←: Select Item
F1 : Help Pu/Pd/+/-: Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
Figure 3-5
•
ACPI function:
Select
Enabled
if your system has an ACPI function.
The choice: Enabled, Disabled.
•
Switch Function:
You can choose whether or not to permit your system to enter complete
Suspend mode. Suspend mode offers greater power savings, with a correspondingly
longer awakening period..
The choice: Break/Wake, Disabled.
•
Doze Speed (div by) :
Sets the CPU's speed during Doze mode. The speed is reduced to
a fraction of the CPU's normal speed. The divisors range from 1 to 8
The choice: 1~8.
