20
Virus Warning : Disabled
CPU Internal Cache : Enabled
External Cache : Enabled
CPU L2 Cache ECC Checking : Enabled
Processor Number Feature : Enabled
Quick Power On Self Test : Enabled
Boot Sequence : A,C,SCSI
Swap Floppy Drive : Disabled
Boot Up Floppy Seek : Enabled
Boot Up NumLock Status : On
Memory Pariy Check : Enabled
Typematic Rate Setting : Disabled
Typematic Rate (Chars/Sec) : 6
Video BIOS Shadow : Enabled
C8000-CBFFF Shadow : Disabled
CC000-CFFFF Shadow : Disabled
D0000-D3FFF Shadow : Disabled
D4000-D7FFF Shadow : Disabled
D8000-DBFFF Shadow : Disabled
DC000-DFFFF Shadow : Disabled
Typematic Delay (Msec) : 250
Security Option : Setup
PCI/VGA Palette Snoop : Disabled
OS Select For DRAM > 64MB : Non-OS2
HDD S.M.A.R.T capability : Disabled
Report No FDD For WIN 95 : Yes
Esc: Quit ↑↓→← : Select Item
F1 : Help Pu/Pd/+/-:Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
Figure 3-3
Note: The Security Option contains "setup" and "system". The "setup" indicates that the
password setting is for CMOS only while the "system" indicates the password setting is for
both CMOS and system boot up procedure.
•
Virus Warning:
This category flashes on the screen. During and after the system boots
up, any attempt to write to the boot sector or partition table of the hard disk drive will halt
the system and the following error message will appear, in the mean time, you can run an
anti-virus program to locate the problem. Default value is Disabled
Enabled
:
Activates automatically when the system boots up causing a warning message
to appear when anything attempts to access the boot sector or hard disk
partition table.
Disabled
:
No warning message to appear when anything attempts to access the boot
sector or hard disk partition table.
•
CPU Internal Cache / External Cache:
These two categories speed up memory access.
However, it depends on CPU/chipset design. The default value is Enable. If your CPU
without Internal Cache then this item "CPU Internal Cache" will not be show.
Enabled
:
Enable cachehis category speeds up Power On Self Test.
(POST) after you power on the computer.
Disabled
: Disable cache
•
Quick Power On Self Test:
If it is set to Enable, BIOS will shorten or skip some check
items during POST.
Enabled
:
Enable quick POST
Disabled
:
Normal POST
•
Boot Sequence:
This category determines which drive computer searches first for the
DOS (Disk Operating System). Default value is A,C,SCSI.
System will first search for floppy disk drive, then hard disk drive and then SCSI device.
The options are: C, A, SCSI; C, CDROM, A; CDROM, C, A; D, A, SCSI; E, A, SCSI; F, A,
SCSI; SCSI, A, C; SCSI, C, A; C only; LS/ZIP, C.
•
Swap Floppy Drive:
The swap floppy drive. Default value is Disabled.
