JETWAY 911BF, Руководство пользователя

Страница: 21 / 48

Use the legend keys to navigate through this menu and exit to the main menu. Use Table 3 to
configure the hard disk.
Item Options Description
IDE HDD Auto-
detection
Press Enter Press Enter to auto-detect the HDD on this channel.
If detection is successful, it fills the remaining fields on
this menu.
IDE Primary
Master
None
Auto
Manual
Selecting ‘manual’ lets you set the remaining fields on
this screen. Selects the type of fixed disk. "User
Type" will let you select the number of cylinders,
heads, etc. Note: RECOMP=65535 means NONE !
Capacity Auto Display your
disk drive size
Disk drive capacity (Approximated). Note that this
size is usually slightly greater than the size of a
formatted disk given by a disk checking program.
Access Mode Normal
LBA
Large
Auto
Choose the access mode for this hard disk
The following options are selectable only if the ‘IDE Primary Master’ item is set to ‘Manual’
Cylinder Min = 0
Max = 65535
Set the number of cylinders for this hard disk.
Head Min = 0
Max = 255
Set the number of read/write heads
Precomp Min = 0
Max = 65535
**** Warning : Setting a value of 65535 means no hard
disk
Landing zone Min = 0
Max = 65535
****
Sector Min = 0
Max = 255
Number of sectors per track
Table 1 Hard disk selections
3-2 BIOS FEATURES SETUP
This section allows you to configure your system for basic operation. You have the opportunity to select the
system’s default speed, boot-up sequence, keyboard operation, shadowing and security.
CMOS Setup Utility – Copyright © 1984 – 1998 Award Software
Advanced BIOS Features
18