JETWAY 911BF, Руководство пользователя

Страница: 14 / 48

7. Floppy drive Connector (34-pin block): FDD1
This connector supports the provided floppy drive ribbon cable. After connecting the single
plug end to motherboard, connect the two plugs at other end to the floppy drives.
8. Primary IDE Connector (40-pin block): IDE1
This connector supports the provided IDE hard disk ribbon cable. After connecting the
single plug end to motherboard, connect the two plugs at other end to your hard disk(s). If
you install two hard disks, you must configure the second drive to Slave mode by setting its
jumpers accordingly. Please refer to the documentation of your hard disk for the jumper
settings.
9. Secondary IDE Connector (40-pin block): IDE2
This connector connects to the next set of Master and Slave hard disks. Follow the same
procedure described for the primary IDE connector. You may also configure two hard disks
to be both , Masters using one ribbon cable on the primary IDE connector and another
ribbon cable on the secondary IDE connector.
10. IDE activity LED: HDLED
This connector connects to the hard disk activity indicator light on the case.
11. Front Panel connector: This 16-pin connector to connect to case front panel switch.
11