6
Chapter 2
Hardware installation
2-1 Hardware installation Steps
Before using your computer, you had better complete the following steps:
1.
Check motherboard jumper setting
2.
Install CPU and Fan
3.
Install System Memory (DIMM)
4.
Install Expansion cards
5.
Connect IDE and Floppy cables, Front Panel /Back Panel cable
6.
Connect ATX Power cable
7.
Power-On and Load Standard Default
8.
Reboot
9.
Install Operating System
10.
Install Driver and Utility
2-2
Checking Motherboard’s Jumper Setting
(1) Keyboard Power On function Enabled/Disabled (3-pin): JP4
When setting Enabled you can using keyboard by key in password to power on system.
Keyboard Power On Setting
2-3 closed K/B Power ON Enabled
JP4
1
3
JP4
1
3
1-2 closed K/B Power ON Disable
(Default)
(2) USB Device Power On function Enabled/Disabled (3-pin): JP5, JP6
When setting Enabled you can using USB Device to power on system.
JP6
1
3
1-2 closed
USB Power ON Disable (Default)
2-3 closed
USB Power ON Enabled
JP6
1
3
JP5
1
3
1-2 closed
USB Power ON Disable (Default)
2-3 closed
USB Power ON Enabled
1 3
JP5