33
CPUFAN/SYSFAN Temp1/Temp2 Value
This item allow users setting the temperature value of CPU/SYSTEM for FAN speed
controller change the FAN speed the setting are 30
°
C
∼
100
°
C.
CPUFAN/SYSFAN Speed below Temp1/Temp2
This item allow the FAN work in 50%, 60%, 70%, 80%, 90%, 100% of full speed when the
CPU/SYSTEM temperature below Temp1/Temp2.
Current CPU Temperature/Current System Temp/Current CPUFAN, SYSFAN Speed/
Vcore/Vdd/3.3V
This will show the CPU/FAN/System voltage chart and FAN Speed.
3-11 Miscellaneous Control
This section is for setting CPU Frequency/Voltage Control.
CMOS Setup Utility – Copyright(C) 1984-2004 Award Software
Miscellaneous Control
Item Help
CPU Clock Ratio 8 X
Auto Detect PCI Clk Enabled
Spread Spectrum Disabled
** Current Host Clock is
HOST Clock at Next Boot is 100
** Current DRAM Clock is
DRAM Clock at Next Boot is By SPD
CPU Vcore Select Default
VDIMM Select 2.60V(Default)
VCC1.5 Select 1.55V(Default)
Flash Part Write Protect Enabled
Menu Level >
↑↓→←
Move Enter:/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
Auto Detect PCI Clk
This item allows you to enable/disable auto detect PCI Clock.
The settings are: Enabled, Disabled.
Spread Spectrum
This item allows you to set the CPU Host/PCI clock and Spread Spectrum.
The settings are: Enabled, Disabled.
Host/PCI Clock at Next Boot
This item allows you to select CPU frequency step by step increasing.
The choice are: 400MHz CPU----100MHz~350MHz, 533MHz CPU---133MHz~350MHz
800MHz CPU---200MHz~350MHz
DRAM Clock at Next Boot is
This item allows you select the DRAM Clock for DDR266/DDR333/DDR400. The setting are:
DDR266 for P4/400MHz CPU, DDR266/DDR333 for P4/533MHz CPU, DDR266/DDR333
/DDR400 for P4/800MHz CPU
Flash Part Write Protect
This item allows you protect your BIOS chip from Virus destroy data. When Flash BIOS you
have Disabled this item.
