9
2-4 Install Memory
This motherboard provides
two
184-pin DUAL INLINE MEMORY MODULES (DIMM)
sites for memory expansion available from minimum memory size of 64MB to maximum
memory size of 2.0GB DDR SDRAM.
WARNING!
Due to Intel 865 chipset specification limitation this motherboard can not support
8Mx16/16Mx16/32Mx16 Double Side memory Module.
Valid Memory Configurations
Bank
184-Pin DIMM
PCS
Total Memory
Bank 0, 1 (DDR1) DDR200/DDR266/DDR333/DDR400
DDR SDRAM Module
X1 64MB
∼
1.0GB
Bank 2, 3 (DDR2)
DDR200/DDR266
/
DDR333/DDR400
DDR SDRAM Module
X1 64MB
∼
1.0GB
Total
System Memory (Max. 2.0GB)
2
64MB
∼
2.0GB
Generally, installing DDR SDRAM modules to your motherboard is very easy, you can refer
to figure 2-4 to see what a 184-Pin DDR200/DDR266/DDR333/DDR400 DDR SDRAM
module looks like.
DDR2 (
BANK2+
BANK3)
DDR1 (
BANK0+
BANK1)
NOTE!
When you install DIMM module fully into the DIMM socket the eject tab
should be locked into the DIMM module very firmly and fit into its indention
on both sides.
WARNING!
For the DDR SDRAM CLOCK is set at 200MHz, use only DDR400-compliant
DDR Modules. When this motherboard operate at 200MHz, most system will
not even boot if non-compliant modules are used because of the strict timing
issues, if your SDR Modules are not DDR400-compliant, set the DDR
SDRAM clock to 166MHz to ensure system stability.
Figure 2-4
