34
Auto Detect DIMM/PCI Clock
This item allows you to enable/disable auto detect DIMM/PCI Clock.
The settings are: Enabled, Disabled.
Clock Control
This item allows you to set the CPU Host Clock by Hardware (CPU/PCI 100/33MHz) or
by Software (BIOS)
Host/PCI clock at Next boot is
When Clock Control setting By Software this item allows you to set CPU Host Clock step
by step from 100MHz to 200MHz, use Page Down/Page Up key can change the frequency
to approach over clocking.
DRAM Clock at Next Boot is
This item allows you to set the DRAM clock synchronous as CPU Host Clock or
Asynchronous as Host clock 100MHz, 133MHz, 166MHz to approach your DDR SDRAM
specification.
3-12 Load Standard/Optimized Defaults
Load Standard Defaults
When you press <Enter> on this item, you get confirmation dialog box with a message
similar to:
Load Standard Defaults (Y/N)? N
Pressing <Y> loads the BIOS default values for the most stable, minimal-performance
system operations.
Load Optimized Defaults
When you press <Enter> on this item, you get a confirmation dialog box with a message
similar to:
Load Optimized Defaults (Y/N)? N
Pressing <Y> loads the default values that are factory settings for optimal performance
system operations.
