Jetting TriggAIR, Руководство пользователя

Страница: 12 / 16

12
8. Maintenance
Procedure Daily Weekly Monthly 60 days 90 days
Clean all assemblies and components
thoroughly with dry cloth
X
Recharge battery X
Inspect fasteners and screws X
Check rubber on wheels for wear. Replace if
excess wear has occurred. Excessive wear has
occurred when the rubber is no longer able to
effectively grip the fiber optic fiber
X
Duct pack seal replacement X
Seals replacement Inspect seal before each use.
Wheel cleaning and tightening
Inspect wheel and tighten before and after each use. Clean after each
use, or when necessary
Disconnect power supply and exhaust any air pressure
before servicing any component on the TriggAIR.
Avoid handling leaking couplings, valve seal or
inadequately sealed pipe in air block.
DANGER! Risk of air under pressure penetrating skin.