Jetter AG
Electrical connection | 6
JCM-631 User Manual
27 / 78
6.2.3 Setting up an Ethernet connection between controller and PC
Before you can program a Jetter controller, you must first establish an Ethernet
connection between your PC and the controller.
ü
You need the appropriate Ethernet cable (part number: 60880135)
ü
The controller and PC are switched on and connected with an Ethernet cable.
1.
Set up a new network connection in the Windows® operating system of your
PC. How you set up a network connection depends on the version of the Win-
dows® operating system.
2.
Configure your PC's network connection to connect to the controller. It is im-
portant that the IP addresses of the controller and the network connection
match in the first three IP address elements (default IP address:
192.168.10.15).
ð
The network connection is established and you can program the controller.
