Copyright@1993~2013 Advanced Computer & Network Corp. All Rights Reserved.
81
SAS 712 U Series User Manual
This table shows the column descriptions on
File service
.
Column Name
Description
Protocol
Data service protocol.
User
Current login user.
Client
The client information.
Server
The server information.
This table shows the column descriptions on
iSCSI service
. Most of the options are standard
parameters used in the negotiation between the initiator and target when an iSCSI connection is
created.
Column Name
Description
No.
Number.
Initiator Name
It displays the host computer name.
Initiator IP
It displays the host computer IP.
Target Name
It displays the controller name.
InitialR2T
InitialR2T (Initial Ready to Transfer) is used to turn off either the use of a
unidirectional R2T command or the output part of a bidirectional
command. The default value is Yes.
Immed. data (Immediate Data) sets the support for immediate data
between the initiator and the target. Both must be set to the same
setting. The default value is Yes.
MaxDataOutR2T
MaxDataOutR2T (Maximum Data Outstanding Ready to Transfer)
determines the maximum number of outstanding ready to transfer per
task. The default value is 1.
MaxDataBurstLen (Maximum Data Burst Length) determines the
maximum SCSI data payload. The default value is 256kb.
