9
Safety Checklist
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR ELECTRIC SHOCK.
IMPORTANT SAFETY INSTRUCTIONS
A) READ ALL THE INSTRUCTIONS BEFORE USING THE PRODUCT.
B) TO REDUCE THE RISK OF INJURY, CLOSE SUPERVISION IS NECESSARY WHEN THE PRODUCT IS USED NEAR CHILDREN.
C) DO NOT PUT FINGERS OR HANDS INTO THE PRODUCT. D) DO NOT USE THIS PRODUCT IF THE FLEXIBLE POWER CORD
OR OUTPUT CABLE IS FRAYED, HAS BROKEN INSULATION, OR ANY OTHER SIGNS OF DAMAGE.
D) THIS EQUIPMENT IS NOT INTENDED TO BE USED AT AMBIENT TEMPERATURES LESS THAN -10°C (14°F) OR ABOVE
AMBIENT TEMPERATURES OF 45°C (113°F).
E) THE BATTERY IS INTENDED TO BE CHARGED WHEN THE AMBIENT TEMPERATURE IS BETWEEN -10°C (14°F) AND
45°C (113°F). NEVER CHARGE THE BATTERY WHEN AMBIENT TEMPERATURES ARE OUTSIDE THIS RANGE. A GENERAL
IT’S ALWAYS IMPORTANT TO DO A FEW, BUT IMPORTANT, SAFETY CHECKS BEFORE EVERY RIDE. LET’S GO THROUGH THEM:
BRAKES
CHECK THE BRAKE IS IN GOOD WORKING ORDER. MAKE SURE PEDALS ROTATE BACKWARDS SMOOTHLY AND THAT THE
REAR AXLE IS LUBRICATED.
STEERING
CHECK THAT THE HANDLEBAR AND STEM ARE SECURELY TIGHTENED.
CRANKS AND PEDALS
CHECK THAT THE PEDALS ARE SECURELY TIGHTENED TO THE CRANKS AND THAT THE CRANKS ARE TIGHTENED
TO THE AXLE.
WHEELS AND TIRES
MAKE SURE THAT THE TIRES ARE INFLATED TO WITHIN THEIR MAXIMUM RECOMMENDED TIRE PRESSURE. CHECK TIRES
FOR EXCESSIVE WEAR OR ANY DAMAGE AND THAT THE WHEEL RIMS ARE NOT DAMAGED. CHECK THAT THE WHEEL SPOKES
ARE NOT BROKEN AND THAT THE AXLE NUTS ARE TIGHT.
CHAIN
MAKE SURE ALL BEARINGS ARE LUBRICATED AND RUN SMOOTHLY.
FRAME AND FORK
CHECK THAT THE FRAME AND FORK ARE NOT
IN ANY WAY DAMAGED OR BROKEN.
GENERAL LIMITED WARRANTY
For information about Jetson's General Limited Warranty,
visit support.ridejetson.com
Содержание JJRNY-BLU
