VFD Valve, Piston Complete
Tel. +47 70 03 91 00
www.jetsgroup.com
Product No. 054100973
Doc. Rev.: 8 (2022-03-04)
4
Important Health and Safety Information
Installation, operation and maintenance must be carried out in strict accordance with this guide and with all applicable regulations. For your own
protection and the protection of others, it is necessary to familiarize yourself with, and always follow, the contained safety and environmental
precautions for our products.
This manual is an integral part of the product/delivery. Always keep it in a safe place for future reference. It is entirely the owner’s responsibility to
ensure that all safety and environmental measures, in accordance with local, state and federal laws are followed. Jets Vacuum AS assumes no
responsibility for equipment damage, personal injury or death and/or delays that result from a lack of respect for the instructions for installation
and/or use as stated in this documentation. Disregarding these instructions may invalidate all warranties.
Safety information references are in accordance with Jets Vacuum AS documentation system. If you do not understand the warnings, stop work
immediately and contact Jets Vacuum AS (citing the safety reference number) for further clarification.
For further information about the included warnings or any other safety concerns please contact Jets Vacuum AS.
Safety Warning Symbols
WARNING: Indicates a potentially hazardous situation which, if not avoided could result in
death or serious injury or equipment damage.
Symbol denotes required personal protective equipment is required.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in
minor or moderate injury or equipment damage.
NOTICE: Indicates important information, which if not followed, may cause damage to
equipment.
Important Health and Safety Warnings
1.2 Warning
Be thoroughly familiar with the controls and the proper use of the equipment
prior to installing, starting or using the equipment. Know the equipment
application, limitations and potential hazards.
1.4 Caution
Safety equipment (PPE) necessary for the prevention of accidents at the
installation and operating site must be provided in accordance with local
regulations.
1.9 Personal Protective Equipment - Gloves
Wear suitable protective gloves at all times when working with equipment.
2.14 Warning
The equipment safety is guaranteed only if used in compliance with the
instructions provided. Do not exceed the limits provided.
2.2 Warning
The client is responsible for installation, service and maintenance by a
qualified person.
2.9 Warning
Do not disassemble, repair or modify the product without contacting a
qualified tradesman.
12.5 Notice
Use this equipment only in the manner intended by Jets Vacuum AS. If you
have questions after reading these instructions contact Jets Vacuum AS
directly.
12.7 Notice
Additional and replacement parts should only be obtained from the
manufacturer or distributor.
12.6 Notice
Do not use the Jets™ sanitary system if any component is damaged or
missing.
2.13 Caution
Installation, service and maintenance are to be carried out with due
care. Shock, innapropriate handling, incorrect use of tools and general
mishandling of the product may result in damage to components.
Delivery, Receipt of Goods and Transportation
Goods to be protected against shock, dust, humidity and frost. Suitable adequately dimensioned transporting equipment is to be used. Note that
the equipment may contain components that are easily damaged as a result of inappropriate handling. Jets Vacuum AS is not responsible for or
liable for delivery delays resulting from occurrences outside of Jets Vacuum AS' immediate control. On receipt of goods, check for visual damage.
Any damage detected after dispatch should be reported immediately to Jets Vacuum AS. Damages and/or discrepancies must be reported in
writing no later than eight (8) days after receipt of goods. Commissioning must be postponed until the equipment has been inspected. Do not
dispose of damaged items. Your direct supplier will advise you of the procedure to follow.
Storage
Unless otherwise specified, goods are to be stored in a dry environment between -30°C and +40°C prior to installation. The storage location must
be dust free, low humidity (≤95%) and be free from moisture. Keep clear of foreign objects.
Installation to End Use
Site to be a dry environment b0°C and +45°C. Use in environments below 0°C requires use of antifreeze in liquids. The site location is to
be low vibration Vrms ˂0.2 mm/s) with vibration resistance to acceleration up to 0.7g. The site is to be dust free and protected from grinding and
welding. During installation, the site is to be protected from water, frost, moisture and humidity. Goods are to be stored as per the instructions for
delivery, storage and transport. A visual inspection is to be carried out on receipt of goods as well as at the time of installation to ensure that
storage and transport conditions after receipt have not compromised the quality of the product/s.
