4
INSTALLATION MANUAL (Issue n°00 - 20/09/2022)
Ref.
KF 002 - Yamaha T-MAX 500/530 2001/2019
Assembly Instructions
3)
Discs coupling
For easier assembly, we recommend to prepare the disc pack by mounting
them directly on the hub (but you can also do it in reverse, inside the aluminum
bell).
Before coupling the outer bell, remember to put the spacer that was inside the
orginal clutch (part not supplied by Jetprime) in the same position
, between its
internal side and the hub’s retaining bolt.
4) Clutch unit closure
Insert the springs in the appropriate screws as well as close the clutch unit with
the upper locking disc and the seiger.
Assemble the complete clutch unit on the engine again, placing our aluminum
spacer on the clutch pivot, outside the bell, before tighten the retaining nut with
65 Nm (following Yamaha manual) and lock the new clutch unit.
Fill the water and oil engine tanks again.
WARNING
:
The clutch needs a little running-in, so we recommend doing about 10/15 km
without forcing too much when starting to avoid overheat the discs too much.
