Jetmaster 18f, Инструкции по установке, эксплуатации и обслуживанию

Страница: 7 / 4884

Important Points to Note before Starting Installation.
Paint
It is strongly recommended that the fire is protected from cement and plaster splashes during installation, as
these are difficult to remove from the surfaces.
Installation Requirements
The surface of the hearth and fireplace floor must be sufficiently flat to ensure that the stove can stand level. Any
excessive unevenness (uneven tiles, stone, etc.) should be rectified. There are adjustable feet at each corner
of the stove to take up any small deviations in level.
The appliance must not stand on combustible materials or carpets.
Unpacking
Take care when unpacking the fire to avoid accidental damage. Particular care should be taken with the glass
door and the air control mechanism.
Ensure that all the listed items are present before commencing installation.
●
Stove Body
●
Board Set
●
Log Retainer
●
Legs x 4
●
Leg Bolts x 4
●
Door operating tool
●
Installation & Operating Instructions
●
Guarantee card
Not supplied as standard:
●
Log Box
●
Heat Shield
●
Long Leg Option
Leg Length 155mm
7
●
Optional external air kit
consisting of:
1. Flexible air pipe
2. Adaptor Sleeve
3. Clamp