Jetline CWF-50A, Руководство по эксплуатации

Страница: 18 / 27

-13-
Section VII Optional Accessories
When you purchased your cold wire feeder, you may not have been aware of optional
enhancements for your unit. Jetline is pleased to offer these enhancements which can be
added to your system in the field.
If you are interested in these features, please do not hesitate to contact Jetline directly or
the nearest distributor for more information.
A. 607B Spool Cover
The 607B is a clear plastic cover designed and manufactured for Jetline’s wire feeders. The
cover mounts around the spool holder and encases the standard “30 lb/12 inch” wire spool
which fits onto the spool mounting adaptor. The main purpose of the cover is to protect the
wire from dust and weld particle build-up. The clear plastic allows the operator to see the
spool effectively. Installing the spool cover is a simple, perhaps 5 minute, job.
B. WGP-2ES Motorized Wire Guide Positioner
The standard wire feed unit is provided with a manually adjusted WGP-1 wire guide
positioner. In some applications, the operator cannot easily get to the positioner to make
the desired alterations to
the wire’s location as it enters the weld puddle. Due to the cast
and helix in some wires, the need to adjust the wire’s position can be required.
Jetline offers the WGP-2ES motorized positioner so the operator can adjust the position of
the wire from a remote location. The positioner includes the motorized wire positioner, the
motor control, and a joystick pendant which the operator uses to move the wire guide tip to
the desired position. Speed of motion is adjustable to provide accurate positioning as
desired by the operator.
C. WGP-3 Compact Wire Guide Positioner
In some applications, the space envelope required by the standard WGP-1 is too large.
Jetline manufactures a wire guide positioner which requires less space, yet still gives the
operator the ability to adjust the wire position. The WGP-3 is designed to attach directly to
the torch, but includes a curved wire guide tip. Wire is fed vertically until the moment where
it is angled into the weld puddle.
D. CHWS-100 Wire Straightener
In some applications, minor deviations in wire position are a result of the cast in the wire.
The wire straightener can help limit the twist by using a 3 roll action. Tension on the center
roll is adjustable. The unit mounts on the inlet side of the drive roll assembly. The
straightener is designed to work on 0.035” and 0.045” (0.9/1.0 and 1.2 mm) wire.