background image

CWF-50 Cold Wire Feeder

- 19 -

Section VII

Optional Accessories

When you purchased your cold wire feeder, 

you may not have been aware of optional en-

hancements for your unit.  Jetline is pleased to 

offer these enhancements which can be added 

to your system in the field.

If you are interested in these features, please 

do not hesitate to contact Jetline directly or the 

nearest distributor for more information.

A.  607B Spool Cover

The 607B is a clear plastic cover designed and 

manufactured for Jetline’s wire feeders. The 

cover mounts around the spool holder and en-

cases the standard “30 lb/12 inch” wire spool 

which fits onto the spool mounting adaptor. The 

main purpose of the cover is to protect the wire 

from dust and weld particle build-up. The clear 

plastic allows the operator to see the spool ef-

fectively. Installing the spool cover is a simple, 

perhaps 5 minute, job.

B.   WGP-2ES Motorized Wire 

Guide Positioner

The standard wire feed unit is provided with a 

manually adjusted WGP-1 wire guide positioner. 

In some applications, the operator cannot eas-

ily get to the positioner to make the desired al-

terations to the wire’s location as it enters the 

weld puddle. Due to the cast and helix in some 

wires, the need to adjust the wire’s position can 

be required.

Jetline offers the WGP-2ES motorized positioner 

so the operator can adjust the position of the 

wire from a remote location. The positioner in-

cludes the motorized wire positioner, the mo-

tor control, and a joystick pendant which the 

operator uses to move the wire guide tip to the 

desired position. Speed of motion is adjustable 

to provide accurate positioning as desired by 

the operator.

C.   WGP-3 Compact Wire Guide 

Positioner

In some applications, the space envelope re-

quired by the standard WGP-1 is too large. 

Jetline manufactures a wire guide positioner 

which requires less space, yet still gives the 

operator the ability to adjust the wire position. 

The WGP-3 is designed to attach directly to 

the torch, but includes a curved wire guide tip. 

Wire is fed vertically until the moment where it 

is angled into the weld puddle.

D.   CHWS-100 Wire Straightener

In some applications, minor deviations in wire 

position are a result of the cast in the wire. The 

wire straightener can help limit the twist by us-

ing a 3 roll action. Tension on the center roll 

is adjustable. The unit mounts on the inlet side 

of the drive roll assembly. The straightener is 

designed to work on 0.035” and 0.045” (0.9/1.0 

and 1.2 mm) wire.

Содержание CWF-50




































Отзывы: