Jeti Duplex DC16, Руководство пользователя

Страница: 84 / 109

4. 4.
computer radio control system
EN
4. Stopping the Servo Test
Press the „F4 (Stop)“ button to stop the servo test.
5. Display Receiver Outputs
Press the „F2 (Servo Monitor)“ button to see the outputs being sent
to your selected receiver channel.
6. Range Test
This menu line allows you to set the transmitter output to its range
test mode.
See the receiver instructions for how to set the receiver to its range
test mode.
9.5.3 View Inputs
This menu allows you to view input from the transmitter sticks,
switches and knobs as detected by the transmitter software. This
menu also contains a wizard to guide you through calibrating your
transmitters proportional controls.
It is recommended to calibrate your proportional controls when:
•
You change from modes 1-2 to modes 3-4
•
The proportional controllers do not move to the extremes of the
graphic display
1. Calibration of Proportional Controls
Press the „F1 (Calib)“ button. You will be asked if you really want to
perform the calibration. Press the „F5 (Yes)“ button to confirm.
Follow the onscreen directions: Move all of the proportional controls
slowly to their maximums a few times and return them to their
centered positions. Press the
„F1 (Calib)“ button again to finish
calibration. You will be taken back to the „View Inputs (1/2)“ screen.