EN
MAX BEC / SBEC
MAX BEC / SBEC
2.4.3 Switch - Magnetic switch
The magnetic switch is designed to turn the
MAX BEC 2D Plus
on or
off and is connected to it by a three-wire cable with a connector. To
switch on the MAX BEC 2D Plus, it is necessary to place the supplied
magnet in the carrier on the target so that the key of the carrier and
the key on the magnetic switch are the same orientation. The
magnetic switch has a green LED indicating "on".
G
reen LED “on”
- If the green LED is blinking, this indicates that the
magnetic key is present, but the unit is not switched on yet.
- If the green LED is continuously active, this indicates that the
MAXBEC2D PLUS is active and ready to power your receiver and
servos.
Safety Precautions for the Manipulation of Magnets:
Since the MAXBEC 2D Plus contains magnetic components, it is
necessary to follow some simple rules for the handling of
magnets. The magnet is contained within a special holder
made of aluminium.
1. Keep the magnet a safe distance from all devices that could
be damaged by magnetic interference: Televisions, Credit
Cards, PC's and Pacemakers!
2. Keep magnets away from children, due to the risk of
ingestion or injury!
11 EN
FIG. 4: Description of the magnetic switch and key
Key
Target
Led ON
