JETI model Duplex R4 RES, Руководство пользователя

Страница: 26 / 72

COMPLEX RADIO CONTROL SYSTEM
Signal Fault - setup of the receiver behaviour in case of signal loss,
„hold“- holds the most recent control throw, „out off“ – output
switch-off (no signal generated), „failSafe“ – moves to preset throws
for the individual outputs
FS position - throw setup of selected FailSafe output position in
case of signal loss
FS speed - sets how quickly the throws move to the FailSafe
positions in case of signal loss
Pin Config - receiver pin config can be:
Pin Config - servo
ź
standard impulse output for servos (-100% = 1ms, 0%= 1,5ms /
+100% = 2ms )
Pin Config - Digital
ź
the output pin is in a stable LOW condition (log. 0) if the position
of this channel is negative, otherwise this pin is in HIGH
condition (log.1)
ź
ensure that pin is used only as logical output, don't draw the
current above 1mA
Pin Config - Input
ź
here the pin is configured as an input and its condition
(disconnected/connected to the ground) is sent to the
transmitter as other telemetry data from the sensors
ź
it is allowed to keep the pin disconnected or connected to the
common ground of the receiver
EN
26