JETI model Duplex R4 RES, Руководство пользователя

Страница: 32 / 72

COMPLEX RADIO CONTROL SYSTEM
8.4 R eceiver with the PPM output
- possibility to select PPM pos./neg.
- PPM output is on SAT2 output (if it exists), alternately SAT1 (if it
exists), alternately on the last servo output (then the number of
servo output is decreased by one) depending upon your
selected receiver
- the servo impulses are generated on the other servo outputs
- all the servo outputs are generated simultaneously during the
gap between PPM frames (outputs are then in one group)
FailSafe OutputPeriod SerialLink Rx mode OutputChannelCnt PPM Mode
Enabled 20 ms JB,PPM pos. Normal 8 Direct
8.5 R eceiver with the PPM output in the function of
backup receiver (example of RSAT2 settings)
- PPM output is on SAT2 output (if it exist s ), alternately SAT1 (if it
exists), alternately on the last servo output (then the number of
servo outputs is decreased by one) depending upon your
selected receiver the servo impulses are generated on other
servo outputs
- all the servo outputs are generated simultaneously during the
gap between PPM frames (outputs are then in one group)
- no output repetition or fail safe is carried out. Every time the
receiver gets the data packet, output impulses and PPM burst
are generated once maximally
- if the data from the transmitter is not available for the receiver, all
the outputs are in Out-Off mode
FailSafe OutputPeriod SerialLink Rx mode PPM Mode
Disabled Auto JB,PPM pos. Normal Direct
EN
32