Jet VBS-18MW, Инструкция по эксплуатации и каталог запасных частей

Страница: 6 / 40

6
Introduction
This manual is provided by Walter Meier (Manufacturing), Inc., covering the safe operation and
maintenance procedures for a JET Model VBS-18MW Band Saw. This manual contains instructions on
installation, safety precautions, general operating procedures, maintenance instructions and parts
breakdown. This machine has been designed and constructed to provide years of trouble free operation if
used in accordance with instructions set forth in this manual. If there are any questions or comments,
please contact either your local supplier or Walter Meier. Walter Meier can also be reached at our web
site: www.waltermeier.com.
Specifications
Model Number .................................................................................................................... VBS-18MW
Stock Number .......................................................................................................................... 414418
Cutting Capacity (height) (in.) ............................................................................................................ 12
Cutting Capacity (width) (in.)........................................................................................................ 18-3/8
Maximum Rip Left of Blade w/Fence (in.) ..................................................................................... 16-1/2
Blade Length (in.) ........................................................................................................................... 137
Blade Speeds (SFPM):
High Gear .............................................................................................................1000, 1800, 3200
Low Gear..................................................................................................................... 80, 150, 265
Minimum Blade Width (in.) ............................................................................................................... 1/8
Maximum Blade Width – Wood (in.) ............................................................................................... 1-1/2
Maximum Blade Width – Metal (in.) ...................................................................................................... 1
Table Size (in.) ..........................................................................................................................19 x 19
Front of Table to Center of Blade (in.) ................................................................................................ 10
Table Tilt (deg.) .................................................................................................................45
°
R to 10
°
L
Table Height from Floor (in.) ........................................................................................................ 37-1/2
Wheel Diameter (in.) ................................................................................................................... 18-5/8
Dust Port Diameter (in.)...................................................................................................................... 4
Overall Dimensions (HxWxD) (in.)....................................................................................... 74 x 42 x 38
Motor .................................................................................... 1-3/4 HP, 1Ph, 115/230V (pre-wired 115V)
Net Weight – approximate (lbs.) ....................................................................................................... 456
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, Walter Meier reserves the right to change specifications at any time and without
prior notice, without incurring obligations.
Grounding Instructions
Electrical connections must
be made by a qualified electrician in
compliance with all relevant codes. The
machine must be properly grounded to help
prevent electrical shock and possible fatal
injury.
In the event of a malfunction or breakdown,
grounding provides a path of least resistance for
electric current to reduce the risk of electric
shock. This tool is equipped with an electric cord
having an equipment-grounding conductor and a
grounding plug. The plug must be plugged into a
matching outlet that is properly installed and
grounded in accordance with all local codes and
ordinances.
Do not modify the plug provided. If it will not fit
the outlet, have the proper outlet installed by a
qualified electrician.
Improper connection of the equipment-
grounding conductor can result in a risk of
electric shock. The conductor, with insulation
having an outer surface that is green with or
without yellow stripes, is the equipment-
grounding conductor. If repair or replacement of
the electric cord or plug is necessary, do not
connect the equipment-grounding conductor to a
live terminal.
Check with a qualified electrician or service
personnel if the grounding instructions are not
completely understood, or if in doubt as to
whether the tool is properly grounded. Use only
three wire extension cords that have three-prong
grounding plugs and three-pole receptacles that
accept the tool’s plug.