Jet TPFA-X, Инструкция по эксплуатации и каталог запасных частей

Страница: 6 / 16

6
5.0 Specifications
Model number ........................................... TPFA-X ....................................TPFA-Y .................................. TPFA-Z
Stock number ............................................. 350194 .................................... 350195 ................................... 350196
Table movement .................... X-axis (longitudinal) ................... Y-axis (crossfeed) ..................................... Z-axis
Speed rate, variable ...... 0-32 ipm (0-812.8 mm/m) ........ 0-32 ipm (0-812.8 mm/m) .......0-32 ipm (0-812.8 mm/m)
Maximum torque (in/lb) .................................... 780 .......................................... 780 ......................................... 780
Maximum rotation ...................................... 160 rpm ................................... 160 rpm .................................. 160 rpm
Rapid traverse ...................... 32 ipm (812.8 mm/m) .............. 32 ipm (812.8 mm/m) ............. 32 ipm (812.8 mm/m)
Leadscrew pitch ........................... 5 tpi (5.08 t/mm) ...................... 5 tpi (5.08 t/mm) ..................... 5 tpi (5.08 t/mm)
Motor ............................... 105W/1Amp, 115V, 1PH ......... 105W/1Amp, 115V, 1PH ........ 105W/1Amp, 115V, 1PH
Net weight ................................................. 12.76 lb ....................................12.76 lb .................................. 12.76 lb
Shipping weight ........................................... 14.3 lb ......................................14.3 lb .................................... 14.3 lb
Shipping dimensions ...... 10.5”L x 6.9”W x 14.56”H ........ 10.5”L x 6.9”W x 14.56”H ....... 10.5”L x 6.9”W x 14.56”H
The specifications in this manual were current at time of publication, but because of our policy of continuous
improvement, JET reserves the right to change specifications at any time and without prior notice, without
incurring obligations.
6.0 Setup and Assembly
6.1 Unpacking and cleanup
Open shipping container and check for shipping
damage. Report any damage immediately to your
distributor and shipping agent. Do not discard any
shipping material until the powerfeed
is assembled
and running properly.
Compare the contents of your container with the
following parts list to make sure all parts are intact.
Missing parts, if any, should be reported to your
distributor. Read the instruction manual thoroughly
for assembly, maintenance and safety instructions.
Some parts may have been given a protective
coating. Remove this using a soft cloth and a
cleaner degreaser.