Jet TPFA-X, Инструкция по эксплуатации и каталог запасных частей

Страница: 10 / 16

10
Figure 7
6.5.2 Y-Axis powerfeed
Figure 8 shows installation of Y-Axis powerfeed.
These instructions are similar (with the exception of
the adaptor) to those in section 6.4, steps 1
through 10.
Important: Before drilling and inserting the roll pin,
make sure all previous steps have been done
carefully and correctly.
Figure 8
6.6 Z-Axis (Knee-lift) installation
6.6.1 Z-Axis track
Refer to Figure 9 to install Z-axis track.
Figure 9