10
Assembly
Handwheel
Attach the handle (A, Fig. 4) to the handwheel
(B, Fig. 4).
Mounting the Table
Important
: The table is heavy. Mounting with the
help of another person is recommended.
Referring to Figures 5 and 6:
1. Remove the table
insert
(A) and
tapered
pin
(B).
2. Slide the table so the
saw blade
(D) passes
through the
slot
where the
tapered pin
(B) was
located.
3. Rotate the table 90 degrees so that the miter
slot (C) is parallel to the blade (D) and to the
right of the blade when facing the band saw as
viewed in Figure 6.
4. Line up
the
table
(G) to the trunnions so that
the
bolts
(F
1
, F
2
) feed through the
support
bracket
(E
1
, E
2
).
For band saw model JWBS-18QT
Secure the table with two
lock knobs
(H).
For band saw model JWBS-20QT
Secure the table with
lock knob
(H) to bolt F
1
and
lock handle
(J) to bolt F
2
.
5. Reinstall the table
insert
(A) and
tapered
pin
(B).
Figure 4
Figure 5
Figure 6
