Jet JWBG-8, Инструкция по эксплуатации и каталог запасных частей

Страница: 4 / 20

4
3.0 Safety warnings
1. Read and understand the entire owner's
manual before attempting assembly or
operation.
2. Read and understand the warnings posted on
the machine and in this manual. Failure to
comply with all of these warnings may cause
serious injury.
3. Replace warning labels if they become
obscured or removed.
4. Do not use this grinder for other than its
intended use. If used for other purposes,
Walter Meier (Manufacturing) Inc., disclaims
any real or implied warranty and holds itself
harmless from any injury that may result from
that use.
5. Always use the grinder’s eye shields. In
addition, wear ANSI Z87.1 approved safety
glasses, or a face shield. (
Everyday
eyeglasses only have impact resistant lenses;
they are NOT safety glasses.)
6. Before operating grinder, remove tie, rings,
watches and other jewelry, and roll sleeves up
past elbows. Do not wear loose-fitting clothing.
Confine long hair.
7. Wear protective clothing such as apron or
safety shoes, where the grinding activity
presents a hazard to the operator.
8. Wear ear protectors (plugs or muffs) if the
particular work requires it.
9. Some dust created by power sanding, sawing,
grinding, drilling and other construction
activities contain chemicals known to cause
cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
•
Lead from lead based paint.
•
Crystalline silica from bricks, cement and
other masonry products.
•
Arsenic and chromium from chemically
treated lumber.
Your risk of exposure varies, depending on
how often you do this type of work. To reduce
your exposure to these chemicals, work in a
well-ventilated area and work with approved
safety equipment, such as face or dust masks
that are specifically designed to filter out
microscopic particles.
10. Do not operate this machine while tired or
under the influence of drugs, alcohol or any
medication.
11. Make certain the switch is in the OFF position
before connecting the machine to the power
supply.
12. Make certain the machine is properly
grounded.
13. Make all machine adjustments or maintenance
with the machine unplugged from the power
source.
14. Remove adjusting keys and wrenches. Form a
habit of checking to see that keys and
adjusting wrenches are removed from the
grinder before turning it on.
15. Keep safety guards in place at all times when
the machine is in use. If removed for
maintenance purposes, use extreme caution
and replace the guards immediately after
completion of maintenance.
16. Check damaged parts. Before further use of
the machine, a guard or other part that is
damaged should be carefully checked to
determine that it will operate properly and
perform its intended function. Check for
alignment of moving parts, binding of moving
parts, breakage of parts, mounting and any
other conditions that may affect its operation.
A guard or other part that is damaged should
be properly repaired or replaced.
17. Provide for adequate space surrounding work
area and non-glare, overhead lighting.
18. Keep the floor around the machine clean and
free of scrap material, oil and grease.
19. Keep visitors a safe distance from the work
area. Keep children away .
20. Make your workshop child proof with padlocks,
master switches or by removing starter keys.
21. Give your work undivided attention. Looking
around, carrying on a conversation and “horse-
play” are careless acts that can result in
serious injury.
22. Maintain a balanced stance at all times so that
you do not fall into the tool or other moving
parts. Do not overreach or use excessive force
to perform any machine operation.
23. Disconnect grinder before servicing and when
changing abrasive wheels.
24. Use recommended accessories. The use of
improper accessories may cause risk of injury
to persons.
25. Turn off the machine before cleaning. Use a
brush or compressed air to remove chips or
debris — do not use your hands.
26. Never leave the grinder running unattended.
Turn power off and do not leave machine until
wheels come to a complete stop.