Jet JVM-836, Инструкция по эксплуатации и каталог запасных частей

Страница: 5 / 32

5
28. Maintain a balanced stance at all times so that
you do not fall or lean against the cutter or
other moving parts. Do not overreach or use
excessive force to perform any machine
operation.
29. Use the right tool at the correct speed and
feed rate. Rotate spindle clockwise for right-
hand tools, counterclockwise for left-hand
tools. Do not force a tool or attachment to do a
job for which it was not designed. The right
tool will do the job better and more safely.
30. Use recommended accessories; improper
accessories may be hazardous.
31. Frequently clean this machine. Maintain tools
with care. Keep cutters sharp and clean for the
best and safest performance. Follow
instructions for lubricating and changing
accessories.
32. Turn off the machine before cleaning. Use a
brush or compressed air to remove chips or
debris — do not use your hands.
33. Do not stand on the machine. Serious injury
could occur if the machine tips over.
34. Never leave the machine running unattended.
Turn the power off and do not leave the
machine until it comes to a complete stop.
35. Remove loose items and unnecessary work
pieces from the area before starting the
machine.
36. Don’t use in dangerous environment. Don’t
use this machine in damp or wet locations, or
expose it to rain. Keep work area well lighted.
37. Some coolants used for machining contain
chemicals that may be hazardous to your
health if not used properly. Read and
understand all user information listed on the
coolant container and protect yourself
accordingly.
Familiarize yourself with the following safety notices used in this manual:
This means that if precautions are not heeded, it may result in minor injury and/or possible
machine damage.
This means that if precautions are not heeded, it may result in serious, or possibly even fatal,
injury.
4.0 About this manual
This manual is provided by JET, covering the safe operation and maintenance procedures for a JET Model
JVM-836 Turret Mill. This manual contains instructions on installation, safety precautions, general operating
procedures, maintenance instructions and parts breakdown. Your machine has been designed and constructed
to provide consistent, long-term operation if used in accordance with the instructions set forth in this document.
If there are questions or comments, please contact your local supplier or JET. JET can also be reached at our
web site: www.jettools.com.
Retain this manual for future reference. If the machine transfers ownership, the manual should accompany it.
Read and understand the entire contents of this manual before attempting assembly
or operation! Failure to comply may cause serious injury!