Jet JTAS-10DX, Инструкция по эксплуатации и каталог запасных частей

Страница: 17 / 28

17
Maintenance
Always disconnect power to the machine before performing maintenance. Failure
to do this may result in serious personal injury.
Cleaning
Note: The following maintenance schedule
assumes the saw is being used every day.
Daily:
 Wipe down the table surface and grooves
with a rust preventive.
 Clean pitch and resin from the saw blade.
Weekly:
 Table surface must be kept clean and free of
rust for best results. Apply a coat of paste
wax to the surface to facilitate this.
Alternatively, aerosol protectants are
available from hardware and tool stores.
 Clean motor housing with compressed air.
 Wipe down the fence rails with a dry silicon
lubricant.
Periodic:

Keep the inside of the cabinet and trunnion
area clean.
 Check for excessive play in the tilting and
raising mechanism and in the saw arbor and
re-adjust as required.
 Check for belt tension and wear. Readjust or
replace belt as required.
Lubrication

Grease the tilting worm gear, raising worm
gear, castor system worm gear and the
trunnion areas with a good grade of non-
hardening grease.
 Check all adjustments after lubricating.
Miscellaneous
Routinely check condition of the following items:

Mounting bolts
 Power switch
 Saw blade
 Blade guard assembly