Jet JMD-50LPFD, Руководство пользователя

Страница: 4 / 25

4
ADDITIONAL SAFETY RULES FOR MILL DRILL
1. BE SURE drill bit or cutting tool is securely locked in the chuck.
2. BE SURE chuck key is remove form the chuck before turning on power .
3. Adjust the table or depth stop to avoid drilling into the table.
4. SHUT OFF the power , remove the drill bit or cutting tool, and clean the
table before leaving the machine.
5. CAUTION. When practical, use clamps or a vise to secure workpiece to keep
the workpiece form rotating while the drill bit or cutting tool.
6. WARNING: FOR Your Own Safety Don’t wear gloves when operating a
mill/drill.
SPECIFICATION
Model JMD-50LPFD
cast iron 45mm Drilling capacity
mild steel 32mm
Face mill capacity 80mm
End mill capacity 32mm
Working table size 1000mm
×
240mm (800mm
×
240mm)
Working table cross travel 190mm
Working table longitudinal travel 760mm (560mm)
T-slot size
14mm
Head tilt left right
±
45º
Head swivel
Spindle taper(option) ISO30
Max distance spindle to table 450mm
Spindle stroke 120mm
I
75180 280 6001000 1600
Mo
tor 1.1KW/1.5KW/50Hz
II 150 360 560 1200 2000 3200
I 115 205 345 530 940 1575
Spindle speed(rpm)
(option)
Mo
tor 1.1KW/1.5KW/60Hz
II 230 410 690 1060 1880 3150
Overall dimension 1250mm
×
960mm
×
1320mm
Packing dimension 900mm × 880mm × 1150mm
NW/GW Weight 320/360Kg
WARNING: CHANGE SPEED ONLY WHEN MACHINE IS STOPPED
CHANGING THE GEAR BOX OIL
Tilt the head stock over as shown in Fig 1. Open the drain plug to allow the oil to
drain form the opening completely. Then lock the oil drain plug and turn the
head to be upright position. Remove the oil filler plug fill the oil to the gear until
the oil lever reach the middle of oil fluid lever indicator. Then lock the plug.
IMPORTANT: The gear boxlubrication oil: 32# mechanical oil, 3L.
CHANGE OIL EVERY ONE YEAR.