Jet JMD-50LPFD, Руководство пользователя

Страница: 13 / 25

13
OPERATION PROCEDURE
Manual feed
Turn the power feed switch 1 off, handle 4 with be vertical with the axis of
Spindle stroke dial 3, rotate limited screw 5 and be contacted with handle 4, then
can be manually feed spindle.
When the power feed switch 1 on, make handle 4 vertical , locked limited screw 5,
rotate Speed leve 2 to “0” , then can be manually feed spindle.
When want to trade off manually feed and power feed, stop the machine and
turn on power feed switch 1 and speed lever 2. Make handle 4 vertical can be
manually feed Spindle, Push handle 4 right can be power feed Spindle.
Power feed
Turn on Power feed switch 1 and Speed lever 2, Start the machine and push
handle 4 right can be power feed spindle , the machine can be automatically shut
down when spindle arrived at the designed Depth.(max Depth
120mm,availability Depth 115mm), and spindle send back.Turn Speed lever 2
can realize 0.10, 0.18, 0.26 three kinds depth feed to choose.
Want to make the machine spindle direct into power fed,loose locket nut 6, make
Spindle stroke dial 3 to max stroke depth dial position, tighten locked nut 6 form
Spindle stroke dial 3 can read spindle the position.
Adjustment power feed depth
Move spindle to the designed position , shut down the machine . Push handle 4
right , loose locked nut 6, adjusted Sindle stroke dial 3, make the deisgned dial
level with “0”,locked Spindle stroke dial 3, start the machine can power feed.
Automatically shut down when spindle arrived at the designed Depth, and
spindle send back. During power feed, make handle 4 vertical can stop power
feed. Make handle 4 vertical can stop power feed. Need to use micro feed device,
rotate Speed lever 2 to “0”, push handle 4 right, loose locked screw 8, adjust
mirco feed dial 7 to “0”, tighten locked screw 8, totate hand wheel 9 can realize
micro feed.
The system have safety clutch device, and be on use estate before leave factory.
When clutch invalidation because of fray, and want to adjustment, can take
away the panel and adjust spring can immediately recover the function.