Jet J-CK350-4, Инструкция по эксплуатации и каталог запасных частей

Страница: 5 / 32

5

Do not stand on the machine. Serious injury
could occur if the machine tips over.

Never leave the machine running
unattended. Turn the power off and do not
leave the machine until it comes to a
complete stop.

Remove loose items and unnecessary work
pieces from the area before starting the
machine.
SAVE THESE INSTRUCTIONS
Familiarize yourself with the following safety notices used in this manual:
This means that if precautions are not heeded, it may result in minor injury and/or
possible machine damage.
This means that if precautions are not heeded, it may result in serious injury or possibly
even death.
The specifications in this manual are given as general information and are not binding. JET reserves the
right to effect, at any time and without prior notice, changes or alterations to parts, fittings, and accessory
equipment deemed necessary for any reason whatsoever.
4.0
About this machine and manual
The J-CK350 circular saw is designed to provide a reliable solution to the needs of machine shops and
production environments that work with aluminum or light alloys. The J-CK350 is manually operated: after
clamping the material in the vise, the operator presses the trigger handle starting the blade, and brings the
operating lever downward to cut the material. The saw performs miter cuts up to 45º to the right or left.
This manual is provided by JET, covering the safe operation and maintenance procedures for the J-
FK350 Cold Saw. This manual contains instructions on installation, safety precautions, general operating
procedures, maintenance instructions and parts breakdown. Your machine has been designed and
constructed to provide consistent, long-term operation if used in accordance with the instructions as set
forth in this document.
If there are questions or comments about this product, please contact your local supplier or JET. JET can
also be reached at our web site: www.jettools.com.
Retain this manual for future reference. If the machine transfers ownership, the manual should
accompany it.
Register your product using the provided card, or register online: http://www.jettools.com
WARNING: Some dust, fumes and gases
created by power sanding, sawing, grinding,
drilling, welding and other construction
activities contain chemicals known to the
State of California to cause cancer and birth
defects or other reproductive harm. Some
examples of these chemicals are:

lead from lead based paint

crystalline silica from bricks, cement and
other masonry products

arsenic and chromium from chemically
treated lumber
Your risk of exposure varies, depending on
how often you do this type of work. To
reduce your exposure to these chemicals,
work in a well-ventilated area and work with
approved safety equipment, such as dust
masks that are specifically designed to filter
out microscopic particles. For more
information go to http://www.p65warnings.
ca.gov/ and http://www.p65warnings.ca.gov/
wood.
WARNING: This product can expose you
to chemicals including chlorinated paraffins
which are known to the State of California to
cause cancer, and ethylene glycol which is
known to the State of California to cause birth
defects or other reproductive harm. For more
information go to http://www.p65warnings.ca.
gov.