Jet HBS-56MVS, Инструкция по эксплуатации и каталог запасных частей

Страница: 6 / 32

6
4.0 Specifications
Model number
HBS-56MVS
Stock number 414558
Motor and Electricals
Motor type DC brushed motor
Horsepower 1/2 HP (0.375 kW)
Motor phase single
Voltage 115 V only
Cycle 60 Hz
Listed FLA (full load amps) 3.8 A
Motor speed 1200-3600 RPM
On/off switches Magnetic push-button
Power transfer Gear box
Power cable SJT 3x18AWG, 300V, length 5-1/2 ft. (168 cm)
Power plug installed 5-15P
Recommended circuit size
1
15 A
Sound emission without load
2
60~65 dB at 1m (40 in.)
Capacities
Cutting
capacities
Round
90 deg. 5 in. (128 mm)
45 deg. 3-3/4 in. (95 mm)
60 deg. 1-3/4 in. (44 mm)
Rectangle
(HxW)
90 deg. 5 x 6 in. (128 x 150 mm); and 2 x 6 in. (51 x 152.4 mm)
45 deg. 3-3/4 x 2-1/3 in. (95 x 60 mm)
60 deg. 1-1/4 x 1-3/4 in. (32 x 44 mm); 5 x 1-3/4 in. (128 x 44 mm)
Throat depth 5 in. (128 mm)
Bow and blade
Blade type provided 14 TPI, Raker type, bi-metal
Blade size (WxTxL) 1/2 x 0.025 x 64-1/2 in. (13 x 0.64 x 1638 mm)
Blade speeds variable, 80-230 SFPM (25-72 MPM)
Blade wheel diameter 7-3/8 in. (187 mm)
Bed and vise
Work table height from floor 28 in. (710 mm)
Cutting angles per vise position back position 0-45 deg.; front position 45-60 deg.
Main materials
Bed cast iron, ground surface
Bow cast iron
Stand steel
Side blade guides ball bearings mounted on eccentric shafts
Rear blade guides ball bearings
Band wheels flanged cast iron
Dimensions
Floor space required 20.47 x 43.3 in. (520 x 1100 mm)
Overall assembled (LxWxH), lowered position 38.58 x20.47 x 43.3 in. (980 x 520 x 1100 mm)
Shipping dimensions (LxWxH) 35.43 x 17.8 x 21.65 in. (900 x 452 x 550 mm)
Weights
Net weight 136 lbs. (62 kg)
Shipping weight 147 lbs. (67.2 kg)
Table 1
1
subject to local/national electrical codes.
2
The specified values are emission levels and are not necessarily to be
seen as safe operating levels. As workplace conditions vary, this information is intended to allow the user to make a
better estimation of the hazards and risks involved only.
L = length, W = width, H = height, T=thickness
SFPM = surface feet per minute RPM = revolutions per minute TPI = teeth per inch