Jet Elite EVC-400DGSP, Руководство пользователя

Страница: 5 / 65

5
33. Pull the mains plug if the machine is not in use.
34. Make sure the workpiece is securely clamped.
The profile must be clamped on left and right side of the
saw blade, by use of both hold-down clamps.
35. The mitre circular saw is intended for industrial use.
Familiarize yourself with the following safety notices used in this manual:
WARNING: This means that if precautions are not heeded, it may result in serious, or possibly even fatal, injury.
CAUTION: This means that if precautions are not heeded, it may result in minor injury and/or possible machine damage.
SAVE THESE INSTRUCTIONS
WARNING:
These symbols blow advise that you follow the correct safety procedures when using this machine.
Read and understand entire user
manual before machine use Wear eye protection Wear ear protection Attention:
high voltage
Attention:
danger of crushing hands Attention:
wait until sawblade has stopped before
opening cover
Attention:
the profile must be clamped
on left and right side of saw
blade, by use of both hold-
down clamps