Jet AFS-1000C, Инструкция по эксплуатации и каталог запасных частей

Страница: 2 / 24

2
1.0 IMPORTANT SAFETY
INSTRUCTIONS
When using an electrical appliance, basic
precautions should always be followed, including
the following:
READ ALL INSTRUCTIONS BEFORE USING THIS
AIR FILTRATION UNIT.
To reduce the risk of fire,
electric shock, or injury:
1. Read and understand the entire owner's
manual before attempting assembly or
operation.
2. Read and understand the warnings posted
on the machine and in this manual. Failure
to comply with all of these warnings may
cause serious injury.
3. Replace the warning labels if they become
obscured or removed.
4. Do not use this air filtration system for other
than its intended use. If used for other
purposes, JET disclaims any real or implied
warranty and holds itself harmless from any
injury that may result from that use.
5. Never duct a machine directly into the air
filtration unit.
6. To avoid a potentially dangerous situation,
do not use this equipment to filter volatile
fumes or smoke.
7. Do not use this equipment to filter
flammable vapors. This air filtration unit is
designed and intended for the filtration of
air borne dust only. It is neither designed
nor intended for any other purpose
whatsoever.
8. Keep visitors a safe distance from the work
area. Keep children away.
9. Make your workshop child proof with
padlocks, master switches or by removing
starter keys.
10. DRUGS, ALCOHOL, MEDICATION. Do
not operate tool while under the influence
of drugs, alcohol or any medication.
11. Make certain the switch is in the OFF
position before connecting the machine to
the power supply.
12. Make certain the machine is properly
grounded.
13. Use recommended accessories; improper
accessories may be hazardous.
14. GROUND ALL TOOLS. If tool is equipped
with three prong plug, it should be plugged
into a three-hole electrical receptacle. If an
adapter is used to accommodate a two-
prong receptacle, the adapter lug must be
attached to a known ground. Never remove
the third prong.
15. WARNING : Drilling, sawing, sanding or
machining wood products generates wood
dust and other substances known to the
State of California to cause cancer. Avoid
inhaling dust generated from wood
products or use a dust mask or other
safeguards
to avoid inhaling dust
generated from wood products. Wood
products emit chemicals known to the State
of California to cause birth defects or other
reproductive harm. (California Health and
Safety Code Section 25249.6)
16. Keep safety guards, panels, and doors in
place, secured, and always closed when
the machine is in use. If removed for
maintenance purposes, use extreme
caution and replace the guards, install the
panels and close the doors immediately
after completion of maintenance.
17. Maintain tools with care. Keep filters clean
for the best and safest performance.
18. Turn off the machine before cleaning. Use
a brush or compressed air to remove chips
or debris
—
do not use your hands.
19. Do not use this air filtration unit with a
damaged cord or plug. If the unit is not
working as it should, has been dropped,
damaged, left outdoors, or dropped into
water, return it to a service center.
20. When ceiling mounted, bottom of filtration
unit must be at least 7 feet from the floor.
The mounts must be anchored to building
structure which will support the weight of
the air filtration unit. Never mount to
surfaces such as dry wall or false ceiling
grids.
21. When bench top mounted, do not place this
unit on an unstable surface, or where there
is a risk of tipping over. Serious injury could
occur if the unit tips over.
22. To reduce risk of electric shock, do not
expose filtration unit to water or rain.
23. Do not use in high humidity environments.
Doing so may cause electric shock and/or
decreased performance of the unit.
24. WARNING: Not suitable for use with solid-
state speed controls.
25. Suitable for commercial or industrial use
only.