background image

 

5

3.0

  Introduction 

This manual is provided by JET covering the safe operation and maintenance procedures for the JET 
JBG Series Bench Grinders. This manual contains instructions on installation, safety precautions, general 
operating procedures, maintenance instructions and parts breakdown. This machine has been designed 
and constructed to provide consistent, long-term operation if used in accordance with instructions set 
forth in this manual. If there are any questions or comments, please contact either your local supplier or 
JET. JET can also be reached at our web site: www.jettools.com. 

 

4.0

  Specifications 

Model .................................................................... JBG-6B ......................... JBG-8B ....................... JBG-10B 
Stock Number ....................................................... 577101 .......................... 577102 .......................... 577103 
Overall Dimension (L x H x D/in) ......... 18 x 10-1/2 x 8-1/2 ............ 19 x 12-1/2 x 10 ...... 24-1/2 x 12-1/4 x 13 
Wheel Size (D x W x Bore /in) ...................... 6 x 3/4 x 1/2 ..................... 8 x 1 x 5/8 ...................... 10 x 1 x 1 
Wheels Included/Grit ............................................ 60 & 36 .......................... 60 & 36 .......................... 46 & 24 
Motor ................................................ 5.0 Amp, 115V, 1PH ..... 8.0 Amp, 120V, 1PH ... 10.0 Amp, 120V, 1PH 
Motor Output .......................................................... 1/4 HP ........................... 1/2 HP .............................. 1  HP 
Input Power Required .......................... 370W, 115V, 1PH ......... 746W, 120V, 1PH ....... 1100W, 120V, 1PH 
Motor  RPM ............................................................... 3,450 ............................. 3,450 ............................. 1,750 
Gross Weight (lbs.) ....................................................... 38 .................................. 60 ................................ 119 

 

The above specifications were current at the time this manual was published, but because of our policy of 
continuous improvement, JET reserves the right to change specifications at any time and without prior 
notice, without incurring obligations. 

 

 

 Read and understand the entire contents of this manual before attempting 

assembly or operation!  Failure to comply may cause serious injury

 

Содержание 577101





















Отзывы: