OPERATION AND MAINTENANCE MANUAL PN 28.04.1014 GPU JET-POWER FILTER II 2500 PN 28.09.1013
PAGE 7/43
1.2 -
SPECIFICATIONS
1.2.1 -
OUTPUT CABLES AND TRANSFORMER
1.2.1.1 -
INPUT CABLE (PN 28.01.1146)
The cable is quadripolar, brand “Prysmian”, model CORDPLAST, 4 x
10 mm
2
of gauge, 25 meters of length. It does not come with a plug (the
plug can vary according to the local utility company).
1.2.1.2 -
1
st
OUTPUT CABLE 28VCD, direct plug (PN 28.01.3340)
The normal output cable line is double, extra flexible, 95 mm
2
of gauge,
5 meters of length, equipped with anti-friction protection and output
socket; brand “SUPERSOM” (PN 28.01.1139).
1.2.1.3 -
2
nd
OUTPUT CABLE 28 and 24 VCD, gray connector (PN
28.01.4705 with 5 meters and PN 28.01.4710 with 10 meters)
This is a brand new model of cable, all detachable, equipped with anti-
friction. It comes with 5 or 10 meters of length (as ordered), double
gauge of 70 mm
2
, in one end it comes with a gray connector and in the
other end it comes with a rubber plug , 28V standard, brand
“SUPERSOM” (PN 28.01.1139). Must be used to substitute the battery,
can be attached to the 28VDC connector of high current or to the distin-
guish output connector (24 VDC).
1.2.1.4 -
TRANSFORMER (208V/220V – PN 28.01.1103)
It is designed to deliver alternated current of low voltage to the
rectifier circuit;
Comes with 09 output connections (six-phase), resulting in
28VDC after rectification;
It has 27 input wires to provide a voltage adjustment at the equip-
ment input.
NOTE:
It can be used in 208 or 220V by only switching cables plugged
into the fuse holder. These cables are marked according to its voltage
