Jet Central Rabbit KS 100 SE Series, Руководство по эксплуатации и обслуживанию, Страница: 13 / 43

12
3.6.4 Other functions

Calculation of fuel used

Calculation of ECU battery power used

Graphical display of throttle pulse width

Diagnostics and Alarm posting

RPM Limit for Turboprop output shaft (with optional sensor)

Aircraft Speed Limiter (with optional sensor)
The above measurements can be displayed on the Hand Data terminal (HDT) that is connected to the
POWERPACK/ECU by the integrated S-bus cable.
The configuration/setup parameters are stored in the nonvolatile memory of the ECU. Parameter
changes are supplied by the user utilizing the HDT or may be stored on a user supplied micro SD card
that is inserted into the micro SD slot on the POWERPACK. Black box data may also be viewed utilizing
the PC program titled
“Jet Central BB”
that is downloaded from the USB stick that was included with the
turbine, the program will execute from your PC, see section 12 for details.
3.6.5 Micro SD memory slot location
The micro SD card slot is located on the bottom side edge of the POWERPACK, see section 5.11 for
details.
3.7 Optional Telemetry Interface
The optional S-Bus telemetry interface that is available separately for purchase provides the
communication protocol interface which allows data to be communicated to your telemetry capable radio
system
* . All functions available through the HDT are wirelessly accessible through the telemetry system.
* Contact your Jet Central representative or visit the Jet Central Web site for the latest information for
supported telemetry systems.