JESS WELDING inoMIG 350, Руководство по эксплуатации

Страница: 74 / 112

EN - 20
BA-0014 • 2020-06-05
9 Operation inoMIG 350/400/500
9 Operation
9.1 Control functions
9.1.1 MC1 control system
NOTICE
• Only qualified personnel are permitted to perform work on the device or system.
Fig. 14 MC1 control box
A
Welding voltage display
B Current display
C
LED indicator for material
strength, water flow
D
Select material strength, welding
current, water flow
E
Select JOB, gas test
F Wire feed-in, save JOB
G
Select operating mode
H LED indicator for operating mode
I
Manual/automatic LED indicator
J Select material, select
manual/automatic mode
K Welding power knob, functions,
material options
L Knob for material type, material
strength, wire speed, arc length
M
Welding functions operating
button
N
LED indicator for units
(% or seconds)
O
Operating button for operating
mode selection
P
LED indicator for operating mode
Q Wire speed, arc length display
Pos. Description
A Display for the welding voltage in volts, flashing dot: HOLD function active, adjustable function
and option values
B Display for the welding current in amperes or the material thickness, as well as coolant flow
volume, and other parameters
C LED indicator for material thickness in mm or water flow in l/min
D Operating button for switching between welding current and material thickness (tap for less than
0.5 seconds) and water flow (press for more than 1 second)
E Operating button for retrieving and loading programs (tap for less than 0.5 seconds) or for
activating the gas test (press for more than 1 second)
F Operating button for activating the wire feed-in function or for storing programs
G Mode operating button for switching between MIG, electrode and TIG operating modes
H LED indicator for active operating mode (MIG, electrode or TIG)
I LED indicator, HAND/AUTO (MANUAL/AUTOMATIC) mode
J Operating button for material selection (tap for less than 0.5 seconds) or select manual (HAND)
or automatic (AUTO) mode (press for more than 1 second)
K Knob for setting welding power, all functions, options, material thickness, or other values in the
middle or right-hand display
L Knob for setting the material type, adjusting the arc length (AUTO-
(I)
), setting the wire speed
in m/min (HAND- (I) ), and changing all values in the left-hand display
A
B
C
D
E
F
G
H
I
O
M
L
K
J
N
P
Q