JESS WELDING inoMIG 350, Руководство по эксплуатации

Страница: 64 / 112

EN - 10
BA-0014 • 2020-06-05
4 Scope of delivery inoMIG 350/400/500
4 Scope of delivery
Order the equipment parts and wear parts separately.
The order data and ID numbers for the equipment parts and wear parts can be found in the current product
catalogue. Contact details for advice and orders can be found online at www.jess-welding.com.
4.1 Transport
Although the items delivered are carefully checked and packaged, it is not possible to fully exclude the risk
of transport damage.
4.2 Storage
Physical storage conditions in a closed environment:

See 3.2 Ambient conditions on page EN - 8
5 Maintenance and safety inspection
The machine is virtually maintenance-free. However, the following maintenance tasks are essential:
• Clean the contact tip and gas nozzle regularly to remove weld spatter and dirt. Apply anti-spatter
agent to nozzles after cleaning to reduce spatter adhesion.
• Check the contact tip regularly for wear and damage and replace it in good time.
• Vacuum clean the interior of the machine if necessary, depending on the level of dirt present.
• Welding power source • Operating instructions • “General safety information”
instruction leaflet
Goods-in inspection Use the delivery note to check that everything has been delivered.
Check the delivery for damage (visual inspection).
In case of complaints
If the delivery has been damaged during transportation, contact the last
carrier immediately. Retain the packaging for potential inspection by the
carrier.
Packaging for returns Where possible, use the original packaging and the original packaging
material. If you have any questions concerning the packaging and/or how
to secure an item during shipment, please consult your supplier.
DANGER
Always disconnect from the mains before all servicing and maintenance work.
NOTICE
For safety reasons, the machine must be subjected to an annual safety inspection by JÄCKLE & ESS
System GmbH or another authorised specialist pursuant to
• DIN IEC 60974 part 4: “Arc welding equipment. Periodic inspection and testing”.