4 | BA-40100-02-V17
TOPAX
®
DX
Multichannel controller
ATTENTION!
Before opening the device, ensure that it cannot suf-
fer damage through electrostatic discharge. The fit-
ter is to perform all necessary measures to this end
(e.g. touch a metal conductor which is grounded).
Use ESD-compliant, conducting tools when changing electronics
components and connecting the cable. Wherever possible, avoid
contact with electronic components with bare hands or uninsu-
lated tools.
Failure to comply can damage the TOPAX DX and invalidate the war-
ranty.
All safety mechanisms and guards must be refitted and reactivated as
soon as the work is completed.
ATTENTION!
As well as faulty installation, incorrect controller
settings (setpoint, parameter and configuration level
data, and device-internal modifications) can impair
the process or result in damage.
There should always be a safety device independent of the controller.
Configurations may only be carried out by technical personnel! If neces-
sary use password protection. Always comply with the safety regulations
of the country of use.
1.9 Modifications and obtaining spare parts
TOPAX DX may be converted or changed only by qualified technical
personnel.
Faults and hazards can occur during operation if the TOPAX DX is incor-
rectly configured by installation or maintenance personnel. In this case,
the manufacturer declines any liability.
ATTENTION!
Only genuine manufacturer spare parts and sensors
may be used. Failure to comply will invalidate the
warranty.
2 Before using the equipment
2.1 Use for intended purpose
The TOPAX DX is especially designed and meant for metering and con-
trol applications in swimming pools, SPA and bath waters, water treat-
ment plants and waste water management. The operational safety of the
unit can only be ensured if used according to its purpose.
All other types of use are prohibited and will invalidate the warranty.
2.2 Scope of delivery
Carefully check the delivery prior to installation and refer to the delivery
note to ensure the delivery is complete and to check for any transport
damage. Contact the supplier and/or carrier regarding any questions
concerning the delivery and/or transport damage.
Do not operate defective devices.
The scope of delivery includes:
• TOPAX DX casing (as per the model)
• Tool (M4 screw) to open the casing
• Memory card
• Mounting material
• Operating instructions
• Measuring protocol
• Terminal plan for the sensors
• Electrodes (optional)
• Cable connection TOPAX DX to the electrodes (optional)
The device is delivered either as detached or mounted onto a measuring
water table.
2.3 Steps to take for start-up
The following steps are recommended by the manufacturer in order to
install the TOPAX DX successfully:
• Reading the operating instructions
• Installing the device
• Attach the sensors and actuating element (to the controlling
pumps and switch, etc.)
• Connection of the in- and outputs (“4.9 First set-up and program-
• Calibrate the sensors to the measuring output
• Adjusting the setpoints (“19.1.3 Menu 1.1: Setpoints” on
• Controller explanation (“19.1.7 Menu 2.1: adjust controller” on
• Configuration of the regulating output (“7 Explanation of measuring
Содержание TOPAX DX
Страница 59: ...BA 40100 02 V17 59 Operating instructions...
