Jeppesen Nobeltec InSight Radar 2-Black Box, Руководство по установке

Страница: 3 / 38

Nobeltec
®
InSight Radar 2 - Black Box (IR2-BB)™
All personnel involved in the installation, operation and maintenance of
electronic equipment or those who train personnel on such equipment,
have a duty to know the following safety precautions.
Attention! Read Carefully Before Installation
Your vessel’s radar system has a power supply that can injure or kill.
Never assume power to the radar system is off.
Always consult your vessel's wiring schematics.
Secure power to your vessel's Radar System by placing the power
breaker in the OFF or OPEN positions.
Remove all fuses (even spares) from circuits where a switch might
unintentionally be closed.
Verify power is secured by testing the circuit with a multimeter.
Preventing Electrostatic Discharge Damage
Electrostatic discharge (ESD) can damage equipment and impair
electrical circuitry. It occurs when electronic components are handled
improperly and can result in partial or entire failures.
Always follow ESD-prevention procedures when removing and
replacing IR2-BB cables.
Ensure that the target computer chassis is electrically connected to
the vessel's ground.
Wear an ESD-preventive wrist strap, ensuring that it makes good skin
contact.
Connect the clip to an unpainted surface of the target computer
chassis frame to safely channel unwanted ESD voltages to the
vessel's ground.
To properly guard against ESD damage and shocks, the wrist strap
and cord must operate effectively.
If no wrist strap is available, ground yourself by touching the metal
part of the target computer chassis.
•
•
•
•
•
•
•
•
•
•
•
•
•
iii
Safety Warnings