background image

 

MAINTENANCE 

Daily Checks of the equipment should be carried out by carers. These checks are 

not technical but a basic understanding of the product is needed. Multiple daily 
checks may be needed in schools or therapy rooms where the products are used by 

multiple users.    
 

 
 

Daily Checks  

• 

Replace any lost or worn washers or bolts. 

• 

Check tray for damage. Ensure that the tray edging is secure and that the tray 

is clean and free of any rough or sharp corners. 

• 

Check all upholstery for any signs of wear and tear. 

• 

Brush Velcro® to remove fluff. 

• 

Check wooden parts for splitting or splintering. 

• 

Check straps for fraying and missing or broken buckles. 

• 

Clean any stains or spillages. 

• 

Contact Jenx Limited if any accessories not manufactured by Jenx Limited 

have been attached to the product. Unauthorised accessories may affect the 
safety of this product and invalidate your warranty. 

 
 

We recommend that on a monthly basis a competent person who is familiar with 
this piece of equipment and who has been trained in its use should carry out a more 

detailed check 

 

 
 

Monthly Checks

 

• 

Check all nuts and bolts are secured and that none is missing. 

• 

Check all mechanical movements operate fully. 

• 

Check the structure of the product for signs of fatigue or splintering. 

• 

Castors: Lift base and check each wheel to ensure it is not loose or worn. 

Remove any grease or dirt that has built up on the wheels, check that the 

brake stops the wheels rotating (where applicable). 

• 

Check gas springs for creep by placing a weight on the chair at the highest 

setting, (simulating the child) and leave for 1 hour. If the product has reduced 

significantly in height contact our Customer Service Department for advice. 

 

 
Please ensure the name of the therapist who recommended the equipment is noted 

on the check/inspection log, along with the competent person who has been trained 
in the use of the equipment. Please also ensure that this is updated for changes in 

staff. Please note any “Set up” procedures should always be recorded. 

 

FOR FREE ADVICE ON THE USE OF THIS PRODUCT, PLEASE CONTACT OUR SALES SUPPORT TEAM 

Jenx Limited, Wardsend Road, Sheffield, S6 1RQ, Tel: +44 (0)114 285 3376  Fax: +44 (0)114 285 3528 [email protected] www.jenx.com 

All User

s

 

GB

 

Do not use 

this product if you suspect it is faulty or broken.  

Contact Jenx Limited immediately for advice. +44 (0) 114 285 3376

 

Содержание GAMMA GA1



































Отзывы: