Jensen VM9726BT Скачать руководство пользователя страница 26

Страница: 26 / 140

NAV104

Position Markers

Vehimarker and Lock-on-Road
When your GPS position is available, iGO primo marks your current position with

the Vehimarker. By default, this marker is a red arrow, but you can change this icon

in Settings.
The exact location of the Vehimarker depends on the vehicle type used for route

calculation. The vehicle type can be selected in Route settings.
• If you choose pedestrian: The Vehimarker is at your exact GPS position. The

direction of the icon shows your current heading.

• If you choose any of the vehicles: The Vehimarker may not show your exact

GPS position and heading. If roads are near, it is aligned to the nearest road

to suppress GPS position errors, and the direction of the icon is aligned to the

direction of the road.

Selected Map Location (Cursor) and Selected Map Object
You can mark a map location in the following ways:
• Tap the map when navigating,
• Tap the map when you are asked to confirm the destination at the end of a

search, or

• Tap the map in Find on Map.
When a map location is selected, the Cursor appears at the selected point on the

map.

The Cursor is displayed with a radiating red dot (

) to make it visible at all

zoom levels.
The location of the Cursor can be used as the destination of the route, a new alert

point, you can search for Places around it, or you can save this location as one of

your Favorite destinations.
You can also select some of the objects on the map. If you tap the map at the icon

of a Place of Interest or an alert point, the object will be selected (you see a red

circling border around the object), and you can get information about this object

or use it as a route point.

Содержание VM9726BT













































































































































Результаты поиска

Содержание VM9726BT

Отзывы:

Похожие инструкции для VM9726BT

Бренды по названию

Популярные бренды

Jensen VM9726BT, Руководство по эксплуатации

Результаты поиска

Содержание VM9726BT

Отзывы:

Похожие инструкции для VM9726BT

Бренды по названию

Популярные бренды