Jensen VM9726BT Скачать руководство пользователя страница 102

Страница: 102 / 140

102

NAV104

Changing the Road Types Used in Route Planning

To recalculate the active route with different road type preferences, do as follows.

These changes can also be made in Settings.

1. On the Map screen, tap

and then tap

2. Tap any of the listed road types to modify the route. If needed, scroll the list

for all road types. You have the following options (their order depends on the

selected vehicle type):

•

- You might need to avoid freeways when you are driving a slow

car or you are towing another vehicle.

•

- Charge roads are pay roads where you can purchase a pass or

vignette to use the road for a longer period of time. They can be enabled or

disabled separately from toll roads.

•

- iGo primo includes toll roads (pay roads where there is a per-

use charge) in the routes by default. If you disable toll roads, iGo primo plans

the best toll-free route.

•

- iGo primo includes ferries in a planned route by default.

However, a map does not necessarily contain information about the

accessibility of temporary ferries. You might also need to pay a fare on ferries.

•

- iGo primo excludes unpaved roads by default: unpaved roads

can be in a bad condition and usually you cannot reach the speed limit on

them.

•

- Carpool or HOV lanes can be used if a given number of

passengers are traveling in the vehicle. You should check whether you are

allowed to use carpool lanes before enabling this road type.

3. Tap

to confirm the changes. iGo primo recalculates the route.

The orange line now shows the new recommended route.

Содержание VM9726BT













































































































































Результаты поиска

Содержание VM9726BT

Отзывы:

Похожие инструкции для VM9726BT

Бренды по названию

Популярные бренды

Jensen VM9726BT, Руководство по эксплуатации

Результаты поиска

Содержание VM9726BT

Отзывы:

Похожие инструкции для VM9726BT

Бренды по названию

Популярные бренды