MSR2107
7
TUNER OPERATION
Select a Band
Press the
BAND
button
(16) to change between three FM bands and two AM (MW) bands.
Manual Tuning
Press the
TUNE/TRK >>|
or
|<<
buttons (18, 19) to seek stations up/down step by step.
Auto Seek Tuning
Press and hold
the
TUNE/TRK >>|
or
|<<
buttons (18, 19) to automatically seek the next or
previous strong station.
Preset Stations
Six numbered preset buttons store and recall stations for each band.
Store a Station
Select a band (if needed), then select a station.
Press and hold
a preset button (5-10) for two
seconds. The preset number will appear in the display.
Recall a Station
Select a band (if needed). Press a preset button (5-10) to select the corresponding stored
station.
Automatically Store / Preset Scan (AS/PS)
Automatically Store
Select a band (if needed).
Press and hold
the
AS/PS
(15) button for more than three seconds
to automatically select six strong stations and store them in the current band. The new stations
replace any stations already stored in that band.
NOTE: During Auto Store (AS), the tuner will default to “Local” mode while scanning the
band initially. After scanning the entire band once, the unit will switch to “Distant” mode
for all subsequent Auto Store tuning.
Preset Scan
Select a band (if needed). Press
AS/PS
(15) to scan stations stored in the current band. The
unit will pause for ten seconds at each preset station. Press
AS/PS
again to stop scanning
when the desired station is reached.
Local/Distant Reception (LO/DX)
During radio operation, received signals are usually in stereo mode as indicated by the “ST”
icon. However, when the signals are weak or intermittent, you can activate the Local (LOC)
mode by pressing the
LO/DX
button (20). This mode favors access to local stations whose
signals are much stronger; thereby improving radio reception. Press the
LO/DX
button again to
terminate Local receive mode.
AUDIO
3
2a
4
11
12
13
14
15
16
17
1
2b
INFO
18
19
5
6
7
8
9
10
20
MSR2107
50W x 4
SEARCH ERASE
SEARCH ERASE
